Motorized Actuators

Here is a line-up of motor-operated actuators of basically ON/OFF control. 3100 series is featured by small-size, lightweight and high output. 3400 series and 3420 series use case, cover, mounting portion, etc. commonly with a full-electronic actuator. 3900 series can be used for an inexpensive and simple instrumentation, with a potentiometer mounted for detection of control position, besides small size and lightweight. Explosion-proof approved models are also replete. See here for models and details of specification.

contact us
  • See here for Table of torque and thrust force.
  • See here for Explosion-proof approved models and specification.
3100R Rotary stem motion type
Principal uses 2-position control
Power Drive motor Synchronous motor
Power supply Single phase 100/110/200/220V AC 50/60 Hz
Motor rating 10 minutes
Control mechanism Input signal Switching contact
Ancillary mechanism Overload protection With built-in thermal protector
Space heater
- Optional
5W
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
- With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion External sheath type Protection class IP65 or equivalent
Wiring port G1/2 (1 place)
Wiring port
- Optional
Various adaptors can be mounted
Installation seat Conforms to ISO
3200R Rotary stem motion type
Principal uses 2-position control
Power Drive motor AC reversible motor
Power supply Single phase 100V AC 50/60Hz
Power supply
- Optional
Single phase 110/200/220V AC 50/60Hz
Motor rating 30 minutes
Control mechanism Input signal Switching contact
Opening signal transmission
- Optional
Potentiometer (5kΩ/135Ω)
Ancillary mechanism Control position detection
- Optional
Auxiliary limit switch (voltfree), maximum points of detection 2 places
Overload protection With built-in thermal protector
Space heater
- Optional
* Please contact us for details, as this matter depends on the power supply voltage.
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
- With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion External sheath type Protection class IP65 or equivalent
Wiring port G1/2 (1 place)
Wiring port
- Optional
Various adaptors can be mounted
Installation seat Conforms to ISO
3300R Rotary stem motion type
Principal uses 2-position control / Endless control / Multi-revolution control
Power Drive motor AC reversible motor
Power supply Single phase 100V AC 50/60Hz
Motor rating 30 minutes
Control mechanism Input signal Switching contact
Input signal
- With control pack
4 to 20mA DC or 1 to 5V DC
Opening signal transmission
- Optional
Potentiometer (5KΩ/135Ω)
Ancillary mechanism Control position
detection-Optional
Auxiliary limit switch (voltfree), maximum points of detection 2 places
Dismountable handle type,
wit clutch- Optional
Dismountable handle type, wit clutch
Overload protection With built-in thermal protector
Space heater
- Optional
* Please contact us for details, as this matter depends on the power supply voltage.
Control
- Optional
Control pack (endless type cannot be mounted)
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
- With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion External sheath type Protection class IP55 or equivalent
Wiring port G1/2 (1 place)
Wiring port
- Optional
Various adaptors can be mounted,
Terminal box
Installation seat Conforms to ISO
3400R Rotary stem motion type/3400L Linear stem motion type
Principal uses 2-position control
Power Drive motor AC reversible motor
Power supply Single phase 100V AC 50/60Hz
Power supply
- Optional
Single phase 110/200/220V AC 50/60Hz
Motor rating 30 minutes
Control mechanism Input signal Switching contact
Opening signal transmission
- Optional
Potentiometer (5KΩ/135Ω)
Ancillary mechanism Control position detection
- Optional
Auxiliary limit switch (voltfree), maximum points of detection 2 places
Dismountable handle type Dismountable handle type
Overload protection With built-in thermal protector
Overload protection
- Optional (3400R)
Torque switch on closed side (CW direction only)
Space heater
- Optional
* Please contact us for details, as this matter depends on the power supply voltage.
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
- With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion External sheath type Protection class IP55 or equivalent
Wiring port G3/4 (3400R) G1/2 (3400L) 2 places
Wiring port
- Optional
Various adaptors can be mounted
Terminal box (3400L)
Installation seat Conforms to ISO
3420R Rotary stem motion type/3420L Linear stem motion type
Principal uses 2-position control
Power Drive motor AC reversible motor
Power supply Single phase 100/110V AC 50/60Hz (+/- 5%)
Power supply
- Optional
Single phase 200/220V AC 50/60Hz (+/- 5%)
Motor rating 30 minutes
Control mechanism Input signal Switching contact
Opening signal transmission
- Optional
Potentiometer (5KΩ/135Ω)
Ancillary mechanism Control position detection
- Optional
Auxiliary limit switch (voltfree), maximum points of detection 2 places
Dismountable handle type With handle insertion hole
Overload protection With built-in thermal protector,
Torque switch (3420R is an option)
Space heater
- Optional
* Please contact us for details, as this matter depends on the power supply voltage.
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
- With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion Wiring port G1/2 (2 places)
Wiring port
- Optional
Various adaptors can be mounted
Terminal box
Installation seat Conforms to ISO
3900R Rotary stem motion type
Principal uses 2-position control
Power Drive motor AC reversible motor
Power supply Single phase 100/110V AC 50/60Hz (+/- 5%)
Power supply
- Optional
Single phase 200/220V AC 50/60Hz (+/- 5%)
Motor rating 30 minutes
Control mechanism Input signal Switching contact
Opening signal transmission
- Optional
Potentiometer (1KΩ/135Ω)
Ancillary mechanism Control position detection
- Optional
Auxiliary limit switch (voltfree), maximum points of detection 2 places
Dismountable handle type With handle insertion hole
Overload protection With built-in thermal protector
Space heater
- Optional
* Please contact us for details, as this matter depends on the power supply voltage.
Conditions for installation Ambient temperature -10 to 50°
Ambient temperature
- With space heater
-20 to 40°
Mounting position Should not be mounted in an inverted position from the maintenance face.
Body portion External sheath type Protection class IP65 or equivalent
Wiring port G1/2 (2 places)
Wiring port
- Optional
Various adaptors can be mounted,
Terminal box
Installation seat Conforms to ISO